Digital AC/DC Clamp Meter DT-8250

Caltech Engineering Services India offers DT- 8250 Clamp Meter is completely portable, 3-3/4 digital meter with AC/DC Voltage, Resistance and Frequency test functions. It is used in the laboratory, field servicing, at home and circumstance where high current measurement is required.

Safety Precaution

This complies with pollution 2, CAT-III 600V of the IEC-1010-1 (EN61010-1) and UL3111-1 standards.

Display 3-3/4 Digits (4000 counts) LCD
Jaw opening 57mm (Cable F 55mm/Bus bar: 70x7mm)
Auto-range V, A, W, Hz functions/manual range (Except for Hz function)
Data Hold Except for Hz function
Display updates 3 times/sec
Battery Low battery voltage indication Auto power-off (30 minutes)
Continuity check Buzzer sound at less than about 30W.
Power requirement Single standard 9V battery (IEC6LF22, NEDA 1604 or JIS006P)
Power consumption 6mA
Operating environment 0ºC~40ºC, 70%RH max
Storage environment Storage environment
Dimensions 240mm x 100mm x 50mm
Weight Approx 610g. including battery
Accessories One pair test leads, 9V battery, manual
Function Range Resolution Frequency Accuracy Overload
AC Current 400A
2000A
0.1A
1A
50-60Hz
50-60Hz
± (2%rdg+5dgts)
± (2.5%rdg+5dgts)
2200A
(1 Min)
DC Current 400A
2000A
0.1A
1A
  ± (2%rdg+5dgts)
± (2.5%rdg+5dgts)
2200A
(1 Min)
AC Voltage 4V
40V
400V
750V
0.001V
0.01V
0.1V
1V
50-60Hz ± (1.5%rdg+5dgts) 800VAC
Input Impedance 10MΩ 400V 0.1V 40-400Hz ± (2.5%rdg+5dgts)  
DC Voltage
Input Impedance 10MΩ
4V
40V
400V
1000V
0.001V
0.01V
0.1V
1V
  ± (1%rdg+3dgts) 1200VDC
Resistance 400.0Ω
40.00Ω
400.00Ω
4.000MΩ
40.00MΩ
0.1Ω
0.01KΩ
0.1KΩ
1KΩ
10KΩ
  ± (1%rdg+3dgts)
± (1%rdg+3dgts)
± (1%rdg+3dgts)
± (1.2%rdg+3dgts)
± (1.5%rdg+3dgts)
500VAC
Frequency 99.99Hz
999.9Hz
9.999KHz
99.99KHz
999.9KHz
999.9KHz
0.01Hz
0.1Hz
0.001KHz
0.01KHz
0.1KHz
  ± (1%rdg+3dgts) Sensitivity: 5V rms
Max: <10Vrm<s (10Hz=1MHz)
<300Vrms(50Hz-60Hz)
500VAC
Diode Test current: 0.6mA(appr.) Open vltage: 1.5V (typ) Resolution: 0.001V 500VAC
Continuity   <30Ω 500VAC