Caltech India offers V-Wac Gauge by G.A.L. Gage Company – USA.
The V-WAC™ Gage easily and quickly checks the four essential measurements required for compliance with the NRC Visual Weld Acceptance Criteria. Checks undercut depth, porosity comparison, amount of porosity per linear inch and crown height. An essential and recommonded welding inspection gauges.
Quickly determines if fillet welds meet NRC Visual Weld Acceptance Criteria for Structural Weldments
GAL Gage Co. manufactured V-Wac Gauge can be purchased separately or as part of a complete set of seven fillet weld gauges that determine if your welds conform to specifications.
CHECKS UNDERCUT DEPTH
CHECKS AMOUNT OF POROSITY PER LINEAR INCH
CHECKS POROSITY COMPARISON
CHECKS CROWN HEIGHT
Features:
- ACCURATE
Undercut depth or crown height scale can be read to 1/32 inch.
Porosity comparison of 1/8 inch and 1/16 inch. Linear gauge in 1/16 inch increments. - EASY TO USE
Pointer is easy to set and a locking screw holds it in position for later reference.
Figures and increments are etched into surface.
They are easy to read and will not rub off. - FAST
All four required measurements are made with a single gauge. - STURDY
Gauge is made of stainless steel. - HANDY
Gauge is 1¼ inches by 4 inches, and can be easily carried in your pocket.
Ordering Information:
| GAL-5 | Gauge with 1/64″ Tolerance |
| GAL-5-7 | Gauge with WTPS Gauge and Block |
| GAL-5-8 | Gauge Set |
| GAL-5-7-8 | Gauge Set with WTPS Gauge and Block |
| GAL-5M | Metric Gauge with 1/64″ Tolerance |
In India, we have various customers from Mumbai, Delhi, Bangalore, Chennai, Hyderabad, Ahmedabad, Kolkata, Surat, Pune, Jaipur, Lucknow, Kanpur, Nagpur, Visakhapatnam, Indore, Bhopal, Patna, Vadodara, Ghaziabad, Ludhiana, Coimbatore, Madurai, Nashik, Srinagar, Aurangabad, Dhanbad, Allahabad and Ranchi in India.
